CLEANING
IN THE EVENT OF PROBLEMS
Clean the device only with a moist (never dripping wet!) cloth. If necessary, use a few
drops of dishwashing detergent.
1.
Hand wash BellaBambi
®
applications in warm water using mild soap or dilted dishwa-
shing ditergent, or place it in dishwasher.
2.
Dry BellaBambi
®
application thoroughly.
3.
Disinfect BellaBambi
®
by applying a disinfectant spray, suitable for silicone. The dis-
infectant should not contain phenol derivates or alkylamines (glucoprotamines). We
recommend: Desomed
®
Rapid AF, which is available on
www.bellabambi.de
.
4.
Leave disinfectant on for a while, according to the instructions of the manufacturer.
5.
Then rinse again with water to remove any residues.
6.
Allow BellaBambi
®
to dry thoroughly.
PROBLEM
CAUSE
REMEDY
BellaBambi
®
does not adhere
to the skin
Suction pump is not connected to the power supply or
switched off.
Connect the plug to the mains supply and switch on the
appliance.
Applications are not connected correctly.
Control the connecting parts of the suction pump and the
application.
Skin is very hairy.
Use some lubricant, eventually shaving could be necessary.
The opening area of BellaBambi
®
does not cover
completely.
Use a smaller BellaBambi
®
of squeez it a little bit.
Timer has expired.
Use the On/Off button.
Application is unpleasing
Suction power is set too high.
Reduce suction power until it is noticeable but comfortable.
No lubricating skin care is used.
Use lubricating skin care, if possible.
Not enough lubricating skin care is used.
Use more lubricating skin care, or another product, which does
stronger support gliding.
You can contact BellaBambi
®
if you have any questions. By phone, e-mail or facebook:
+49 (9073) 921 046 1 | [email protected] | facebook.com/bellabambi.de
EN 24