H2NLTGMG2ASF
Bellagio By Airworks
IMPORTANT INSTRUCTIONS
PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER
NOTE: There may be a trace of smoke or odour when unit is first operated. Do not be alarmed.
This indicates that a drop of oil fell on the heating coil during the manufacturing process. It will
quickly evaporate and should not re-occur.
Make sure that the room in which the appliance is located is well ventilated during this
operation. It is normal for the appliance to emit small cracking sounds when you turn it on for
the first time. Do not be alarmed.
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED
TO REDUCE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO PERSONS OR PROPERTY,
INCLUDING THE FOLLOWING:
1. Read all instructions before using this heater.
2. If your heater is equipped with tape used as carry handle, remove it before connecting appliance to the outlet.
3. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use the handle when
moving the heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and
curtains at least 3 ft. (0.9 m) from the front and top of the heater and keep them away from the sides and rear.
4. Extreme caution and reasonable supervision is necessary when any heater is used by or near children or
invalids and whenever the heater is left operating and unattended.
5. Always unplug heater when not in use.
6. Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been
dropped or damaged in any manner. If heater has leaked any oil, discontinue using the heater. Return
heater to an authorized service facility for examination, electrical or mechanical adjustment, or repair.
7. Do not use outdoors. This product is intended for normal household use only.
8. This heater is not intended for use in any area where there is standing water. Never locate heater where it
may fall into a bathtub or other water container.
9. Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord
away from traffic area where it will not be tripped over.
10. To disconnect the heater, turn controls to (OFF)
then remove the plug from outlet.
11. Connect to properly polarized outlets only.
12. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric
shock, fire, or damage the heater.
13. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like
a bed, where openings may become blocked.
14. A heater has hot or arcing or sparking pads inside. Do not use it in areas where gasoline, paint or
flammable liquids are used or stored.
15. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may
cause fire, electric shock, injury to persons or other damage to property.
16. To prevent overload and blown fuses, be sure that no other appliance is plugged into the same outlet
(receptacle) or into another outlet (receptacle) wired into the same circuit.
17. It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord, which becomes hot to the
touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn outlets or receptacles
should be replaced prior to further use of the heater. Plugging heater into a worn outlet /receptacle may result
in overheating of the power cord or fire.
18. Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
19. We do not recommend use of an extension cord as it may overheat and cause a risk of fire. However,
if you have to use an extension cord, the cord should be No. 14 AWG minimum size and rated not less
than 1875 watts, and has to be used only for supplying power to this heater.
20. Be sure that the plug is fully inserted into appropriate receptacle. Please remember that receptacles also
deteriorate due to aging and continuous use: check periodically for signs of overheating or deformations
evidenced by the plug. Do not use the receptacle and CALL your electrician.
Summary of Contents for H2NLTGMG2ASF
Page 10: ......
