Page5
Page6
1. Open the accessory box 2 as pic.
shows
2. Put the shower head into the bathtub
in right position as pic. shows
3. Distinguish water inlet pipe
4. Screw it
5. Side up the bathtub, then install
downcomer
6. Use thread sealing tape to wrap
around the drain hole
7. Make the thread sealing tape smooth
8. Fasten the drain tube
9. Put downcomer into the drain hole on
the ground
11. Put plugs into the drain hole
10. Drain sewage of the tube, then
connect the cold and hot water
pipe separately
12. Install pillow
Installation Process
Installation Process
