background image

2

11 .   To reduce the risk of electric shock, do not immerse or expose the motor assembly, plug or 

the power cord to water or any other liquid .

12 .   Never immerse the unit in water or any other liquid for cleaning purposes .
13 .   Remove the plug from the socket by gripping the plug . Do not pull on the cord to disconnect 

the appliance from the mains . Always unplug the unit when not in use, before cleaning or 

when adding or removing parts .

14 .  The use of accessory attachments that are not recommended or supplied by  

the manufacturer may result in injuries, fire or electric shock .

15 .  A short cord is provided to reduce the hazards resulting from becoming entangled in  

or tripping over a longer cord .

16 .  Do not let the cord hang over the edge of a table or counter . Ensure that the cord is not in a 

position where it can be pulled on inadvertently .

17 .  Do not allow the cord to touch hot surfaces and do not place on or near a hot gas or electric 

burner or in a heated oven .

18 .  Do not use the appliance on a gas or electric cooking top or over or near an open flame .
19 .  Use of an extension cord with this appliance is not recommended . However, if it is necessary 

to use an extension lead, ensure that the lead is suited to the power consumption of the ap-

pliance to avoid overheating of the extension cord, appliance or plug point . Do not place the 

extension cord in a position where it can be pulled on by children or animals or tripped over .

20 .  This appliance is not suitable for outdoor use . Do not use this appliance for anything other 

than its intended use .

21 .  DO NOT carry the appliance by the power cord .
22 .  Do not leave this appliance unattended during use . Always unplug the unit when not in use or 

before cleaning .

23 .  Always operate the appliance on a smooth, even, stable surface . Do not place the unit on a 

hot surface .

Summary of Contents for Bella Nutripro

























Reviews: