11
5. Press “Power” button to turn on the Espresso-brewing system, the water pump will keep
working for 3 seconds with the LED indicators of “POWER”& “STEAM/PREHEAT” buttons
turn on, the LED indicators of “One cup” & “Two cup” buttons flash. All the LED indicators
will turn on once the preheating is finished.
6. Press “One cup”or“Two cup”button, the LED indicator of “POWER” button turns on and the
LED indicator“One cup”or“Two cup”button flashes. And the appliance starts working. After
finish brewing, the appliance will return to the standby mode. Only the selected button and
“POWER” button can work during the brewing process.
7. To adjust the coffee volume, hold and press“One cup”or“Two cup” button for 3 seconds,
the LED indicator of the selected button flashes and the LED indicator of“POWER”button
lights up. Release the selected button once desired volume is reached. And the appliance
will return to the standby mode after the coffee volume is adjusted.
8. To reset the coffee volume to factory setting, hold and press both of the“One cup”and
“Two cup”button for 3 seconds, then the“Power”,“One cup”,“Two cup”buttons flash
for 5 times, which means the coffee volume has been reset and then the appliance will
return to the standby mode.
9. When the “POWER” button is on and “One cup”, “Two cup” and “STEAM/PREHEAT”
buttons are blinking indaicate that there is no water in the water tank during brewing.
10. The red buoy will float when the drip tray is full of water. Please empty the drip tray in time.
11. During brewing cycle, if there is no water in the water tank, the LED indicators of “POWER”
button is on and “One cup”, “Two cup” and “STEAM/PREHEAT” buttons will blinki.
12. If the user wants to empty the water inside Espresso water tank after long time of no use,
hold and press both of“STEAM/PREHEAT”&“Two cup”button for 3 seconds, the water
pump will work only to drain out the water into Drip Tray until there is no water inside the
water tank, then the appliance will return to the standby mode.
13. Always turn the appliance off and disconnect the power supply when not use.
NOTE:
If the user uses Espresso side first, after use or under the standby mode, if the user press
“BREW-OFF” button, its corresponding LED indicator and the white background will turn on, and
the LED indicator of“POWER”button will keep illuminating, while the LED indicators of
“One cup”, “Two cup” and “STEAM/PREHEAT” buttons will turn off.
90103 Bella Pro Combo Espresso and Drip Maker IM r6.indd 11
2020-07-13 8:09 PM
