8
BEFORE FIRST USE
Check that all accessories are complete and the unit is not damaged. Clean all detachable parts
well and understand all the parts and their functions. Add water into water tank to the max level
and brew water for several times without coffee powder, then discard the water.
OPERATION
The appliance has two brewing systems including “Drip coffee-brewing system” and
“Espresso-brewing system.
MAKE DRIP COFFEE
1. Open the drip coffee water tank lid and add some drinking water into the drip coffee
water tank.
NOTE:
Do not fill the water tank with water exceeding the max level as indicated on the water
level gauge. The appliance can brew max 10 cups of coffee every brewing cycle.
2. Put the filter into the coffee funnel and then place the coffee funnel into the funnel holder,
make sure the coffee funnel should be installed well in place.
3. Add proper coffee powder into the filter. Usually a cup of coffee needs a level spoon of
coffee powder, but you may adjust according to personal taste. It is recommended to add
10 cups of water and 60g of coffee powder. And then replace the top lid.
4.
Insert the glass carafe with lid in place onto warming plate horizontally, ensure the center
line of carafe aligns with the anti-drip valve.
5. Connect the appliance with power source, all icons will show on LCD display & all LED
indicators turn on for 2 seconds with one beep sound, then the “STRENGTH” with one
bean, AM & TIME would light solidly, and you can use“HOUR”and“MINUTE”buttons to
adjust the time. After setting time, the appliance will return to standby mode, at that time,
the LCD just show time with PM (or AM) & the“Strength with one bean”.
6. Press “BREW-OFF” button, the appliance starts to work and brew coffee.
WARNING:
Do not open the top lid to avoid being burnt during operation.
NOTE:
Only the “BREW-OFF” button can work during the brewing process.
7. After a while, the coffee dispenses from the coffee outlet and flows into the glass carafe.
90103 Bella Pro Combo Espresso and Drip Maker IM r6.indd 8
2020-07-13 8:09 PM
