background image

Using the Handset Finder (PAGE)

1. Press          on the base.

2. Place the handset back into the base or press the 

T

key on the handset to

stop the page/find feature.

Out-of-Range Warning

If you venture too far from the base, the handset will beep and the display will
show 

“OUT RANGE.”

Reverse your direction to re-establish connection with

the base or the call will be dropped. When the base detects that the handset
has been out of range for 20 continuous seconds it will release the engaged
line. If you try to access the line when the handset is out of range of the base,
the display will show 

“TRY AGAIN.”

Channel Changing

If you are experiencing interference during a telephone call, press the 

CH

key. The BE-3850 will scan up to 50 channels and select the clearest one to
provide the best possible reception. If the current channel is the clearest avail-
able channel, it will keep you on that channel.

OTHER FEATURES

40

If you subscribe to voice mail from the telephone
company and if there are voice messages that
have been left in your voice mailbox, the display
will show 

"MSG WAITING”

(see note below).

Note:

This function requires voice mail subscription from the local telephone
company. Furthermore, the local phone company must provide a type of
voice mail signaling called "FSK” (Frequency Shift Key)  Not all
telephone companies have the visual message waiting feature available.
Please contact your local telephone company to check if this is available
in your area.

Tip:

If you wish to delete the "Message Waiting" message, delete it as described in
the handset settings section “Deleting the Message Waiting Indication” (see
page 27). 

New Call Light

When you receive a Caller ID message, voice mail message, or when the phone
is ringing, the New Call light will flash accordingly.

• For Caller ID, the New Call light will flash

to indicate that you have a new Caller ID
call stored in memory.

• When you have a voice message waiting

the New Call light will also flash.

39

MESSAGE WAITING

8:02  12/25    0     39

NEW

TOTAL

AM

MSG WAITING

MSG

New Call Light

PAGE

PAGING

10:02  10/11    0     11

NEW

TOTAL

AM

If the handset is within range,
it will beep for 20 seconds.

Summary of Contents for Sonecor BE-3850

























Reviews: