Redialing
1. Press
T
.
2. Wait until you hear a dial tone, and then press
R
to redial the number last dialed (up to 32 digits).
Note:
You can also press
R
/DELETE first to
display the number and then press
T
to dial the
number displayed.
Additional Options
20
BASIC OPERATION
Making Calls
1. Pick up the handset from the base and press
T
.
2. Wait until you hear a dial tone, and then dial the
number you wish to dial.
3. When you are finished talking, press the
T
key or
place the unit back into the base to end the call.
Note:
The
CHARGE
light on the base will illuminate
when the line is active.
Receiving Calls
When you hear the phone ring:
1. If the handset is in the base, lift the handset from the
base. The handset will turn on. There is no need to
push the
T
key if the unit is on the base when the
call comes in. This auto-answer feature can be
programmed off (see “Settings,” page 27).
2. If the handset is off the base, you will need to press
T
to answer the call. The display will show the
Caller ID information after the first ring.
3. When you are finished, push
T
or place the handset
back on the base.
BASIC OPERATION
CID
Redial
Talk
Flash
Mute
Save
MEM
Menu
Edit
Delete
9:45 10/11 38 3
AM
RPT
JOHN SMITH
555-555-1212
#
NEW
CID
Redial
Talk
Flash
Mute
Save
MEM
Menu
Edit
Delete
9:45 10/11 38 3
AM
RPT
JOHN SMITH
555-555-1212
#
NEW
To:
Do This:
Adjust the volume in the
Press
during a call until the desired volume level
earpiece
is reached.
Switch to temporary tone
Press the
<
key after the phone is in use. The phone
dialing
will remain in tone dialing mode for the duration of the call.
Receive a call waiting call
Press
E
to go to the new caller.
Press
E
again to go back to the original caller.
Mute a call
Press the
L
key.
Press
L
to continue speaking to the caller.
00 04
MIN
SEC
TALK
00 04
MIN
SEC
TALK
00 04
MIN
SEC
TALK
RING
9:45 10/11 0 11
NEW
TOTAL
AM
CID
Redial
Talk
Flash
Mute
Save
MEM
Menu
Edit
Delete
9:45 10/11 38 3
AM
RPT
JOHN SMITH
555-555-1212
#
NEW
19
