SECTION 5 12-750-100
DBAA MTG CORD
PLUGGED INTO LINE
JACK IN 10A
TELEPHONE SET
•'
TELEHELPER
'/
SPEAKERPHONE
Fig. 7- 0ptionallnstallation for Single Line Modular Desk Type Telephone Set With
0-
180882 Kit of Parts
Note:
Tighten the screws firmly but avoid
overtightening which could distort adapter.
(9) Place telephone set onto 730B phonemount
and press down.
4.
INSTAllATION TEST
A.
Associated Telephone Set
4.01
To test telephone set associated with speaker
phone, proceed as follows:
•
Make sure speakerphone rocker switch is in
OFF position
•
Remove handset from telephone set
•
Dial ring back code to check ringer
Page 8
•
Check telephone set transmission and recep
tion
•
If a 304A adapter is provided disconnect the
speakerphone D8AA cord from adapter or
connecting block and check that telephone
set continues to operate properly.
B.
Speakerphone
4.02
To test speakerphone proceed as follows:
•
Make sure speakerphone rocker switch is in
OFF position
•
Turn volume control knob to mid position
•
Dial up test number as per local instructions
•
At completion of dialing push speakerphone
rocker switch to ON position
BSP 512-750-100-i01-i01_198-08.jpg Scanned by Frank Harrell, {Cowboy Frank) Castle Rock, Colorado Feb 23,2012 22:59:18