SECTION
574-504-720
Transport Assemblies
3.05
To remove transport assemblies:
01Remove paper tape. Perform
3.01,
Step
1.
®Remove punch and reader assembly. Perform
3.02,
Steps
1
through
10.
FEED PAWL
�
�
osen clamp screw. Remove
�d .atoh•t whrel.
CLAMPING
SCREW
®
Remove retainer ring
(119649),
flat washer
(156572)
and felt washer
(95758)
from end of
connector
link
(2
Pis.)
and remove connector
link.
TRANSPORT DRIVE
ECCENTRIC ASSEMBLY
4
Remove outer retainer ring
(119649)
and
·felt washer
(169654)
in front of pawl.
Remove inner retainer ring
(119649)
pawl and pawl spring (take care not to
lose spring).
Note:
When replacing, carefully compress
spring in hole as pawl
is
moved onto post
in front of spring.
Steps
6
through
11
for Punch transport.
Steps
12
through
14
for Reader transport.
Page6
