background image

 

                                                                          

07110A-1 

 

99161 MANUAL Ver.1.0 
Page:3      ENGLISH VERSION 

99161 MANUAL Ver. 1.0 
Page:3      ENGLISH VERSION 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

SAFETY INFORMATION 

Your wireless hand-held portable transceiver 

contains a low power transmitter. When the Push 

to Talk (PTT) button is pressed it sends out radio 

frequency (RF) signals. The device is authorized 

to operate at a duty factor not to exceed 50%. On 

August 1996, the Federal Communications 

Commissions (FCC) adopted RF exposure 

guidelines with safety levels for hand-held 

wireless devices. 

 

CAUTION:

 To maintain compliance with the 

FCC’s RF exposure guidelines hold the transmitter 

and antenna at least 2 inches (5 centimeters) from 

your face and speak in a normal voice. With the 

antenna pointed up and away from the face. If you 

wear the FRS on your body while using the 

headset accessory, use only the supplied belt clip 

for this product. When transmitting take it off the 

belt to ensure that the antenna is at least 2 inch   

(5 centimeters) from your body. 

 

Use only the supplied antenna. Unauthorized 

antennas, modifications, or attachments could 

damage the transmitter and may violate FCC 

regulations. 

 

Warning: Adjustment to this unit or 

replacement of any transmitter component 

(crystal, semiconductor, etc.) to this unit that 

could result in a violation of the rules. 

Summary of Contents for 99161

















Reviews: