9
07110A-1
99161 MANUAL Ver.1.0
Page:9 ENGLISH VERSION
99161 MANUAL Ver. 1.0
Page:9 ENGLISH VERSION
Receiving a Call
When your FRS unit is turned on and is not being
used to transmit voice communication or pages, the
unit is continuously set in receiving mode. When you
receive a call on the current channel you are using,
the LCD display will show the receive icon.
Transmitting a Call
1.
Press and hold the PTT button to transmit.
The transmit icon will show in LCD display.
2.
While holding the PTT button, speak in a
normal voice about 2 to 3 inches away from
the microphone.
3.
Release holding the PTT button when you
have finished transmitting.
NOTE:
In order to have two-way communication, all
parties must be transmitting on the same channel
and same sub-code. Refer to the “Selecting
Channels” and “Selecting the CTCSS Sub-Code”
sections for more information.
Selecting Channels
The 99161 radio has 14 available channels.
To change channels:
1.
Press F(function) button once. The channel
number on the display will begin to flash.
2.
While the channel number is flashing,
Press the
5
button to a higher channel.
Press the
6
button to a lower channel.
3.
Press the F (function) button to confirm the
desired channel.
NOTE:
Refer to the "FRS Channel Table" section of
this manual for detailed frequency listings.
Selecting the CTCSS Sub-code
The 99161 radio has 38 available CTCSS Sub-
codes. Please set a CTCSS Code in addition to a
