13
2. Press [SCROLL UP or DOWN
BUTTON] to scroll to “AREA CODE”
and press [OK BUTTON].
3. The current Area code number will
be displayed. Press [DELETE (DEL)
BUTTON] to delete the existing Area
Code. The “NUMBER?” will be
displayed;
4. Enter the new three digits Area
Code and press [OK BUTTON] to
confirm. The handset will emit a long
beep and will display “SAVED” to
confirm new Area Code number.
2.5 Handset Key Pad Beep Tone
ON/OFF:
You can set the handset to emit
confirmation beep whenever you press a
key.
1. While in STANDBY mode. Press
[MENU BUTTON].
2. Press the [SCROLL UP or DOWN
BUTTON] to go to the “HANDSET”
Setting, press [OK BUTTON].
3. Press the [SCROLL UP or DOWN
BUTTON] to go to the “KEYPAD
BEEP” Setting, press [OK
BUTTON].
4. Press the [SCROLL UP or DOWN
BUTTON] to select “ON” or “OFF”,
press [OK BUTTON] to confirm.
2.6 Base Selection – Auto or Manual:
You can set the handset to select the
Base by “AUTO or MANUAL Selection”.
AUTO Selection, is when you prefer the
handset to automatically select the
available base during handset
registration.
MANUAL Selection is when you prefer to
assign the base unit for registration.
1. While in STANDBY mode. Press
[MENU BUTTON].
2. Press the [SCROLL UP or DOWN
BUTTON] to go to the “HANDSET”
Setting, press [OK BUTTON].
3. Press the [SCROLL UP or
DOWN BUTTON] to go to the
“SELECT BASE” Setting, press
[OK BUTTON].
4. Press the [SCROLL UP or
DOWN BUTTON] to select
“MANUAL” or “AUTO”, press
[OK BUTTON] to confirm.
NOTE: When you have activated the
AUTO BASE selection, and the
handset is out of range on the
current base, the handset will only
search for the strongest base in
standby (not during communication).
Before you can select a Base unit,
the handset must be registered to
the base first.
2.7 Handset Reset:
This will undo all handset setting
changes and set back all to factory
default setting (i.e. ringer volume,
ringer melody, etc.).
1. Press [MENU BUTTON], use the
SCROLL UP or DOWN
BUTTON] to scroll to the
handset and press [OK
BUTTON].
2. Press the [SCROLL UP or
DOWN BUTTON] to scroll to
RESET and press [OK
BUTTON].
3. Enter the Pin Code (default pin
code is 0000) and press [OK
BUTTON]. The handset will
reset to factory setting and will
go back to standby mode.
2.8 Handset Language Display
Setting:
This will enable you to select the
display language from English,
French and Spanish.
1. Press [MENU BUTTON], press
[SCROLL UP or DOWN
BUTTON] to scroll to
Summary of Contents for 31331
Page 9: ...8 CONTROLS DIAGRAM ...
Page 30: ...31331 181010 ...
