BELL+HOWELL BHNV10, User Manual

Page: 8 / 23

7
2. First Use
2.1 Inserting the Memory Card
Insert the included MicroSD memory card to record and store your videos
and photos. When the battery is low, media stored on the memory card will
not be erased. Please insert the MicroSD memory card by following the
steps below:
1. Open the rubber jack door to access the memory card slot.
2. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card down until you hear an audible click.
The memory card can only be inserted in one way. Do not force the
card in if it will not go in smoothly.
3. Close the rubber jack door.
4. To remove the memory card, simply push in and the card will eject out.
2.2 Installing the Battery
Insert the lithium-ion battery into the battery compartment with the negative
side first.
NOTE:
•
Please format the memory card before using the monocular
(Caution, this will erase all data on the card).
•
Do not remove or insert the memory card when recording. It may
damage the card or cause data loss.
•
Memory card rating must be Class 10 or above.
2 . First Use