3. Using Your Doorbell
2. Doorbell First Use
2.1 Inserting a Memory Card (not included)
A memory card can be used to store recorded activity for future playback on
the app. You do not need a memory card if you purchase a cloud subscription
on the Tuya app. When the battery is low, media stored on the memory card
will not be erased. To insert a MicroSD memory card follow the steps below:
1. Open the battery door by sliding it down towards the bottom of doorbell.
2. Remove the batteries to access the memory card slot.
3. Insert the memory card. Ensure that the metal contacts are inserted first.
Push the memory card in until you hear an audible click.
Note: the memory card can only be inserted in one way. Do not force
the card in if it will not go in smoothly.
4. Replace the batteries back into the doorbell. Make sure to insert them in the
correct direction.
5. To remove the memory card, simply push in and the card will eject back out.
2.2 Charging the Battery
1. Open the battery door by sliding it down towards the bottom of doorbell.
2. Remove the batteries and peel off the sticker on the negative end of the
batteries, exposing the metal plate. Replace the batteries in the doorbell.
3. Insert the small end of the included USB cable into the doorbell s port
under the battery door and the larger end in to a USB/AC adaptor (not
included).
4. Charge the batteries fully before use. The charging time for the batteries
is around 7 hours using a 1A USB/AC adaptor. Under normal use, the
battery charge will last 2-3 months.
NOTE:
Please format the memory card before using the doorbell
(Caution: This will erase all data on the card).
Do not remove or insert the memory card when recording. It
may damage the card or cause data loss.
Memory card rating must be Class 10 or above from
compatible high-quality brands.
