Belkin TuneSync F5U255ea, User Manual

Page: 12 / 100

6
EN
Installation
Installation
Mac Users
IMPORTANT NOTE: Please do not connect any USB devices
to the hub until instructed to do so in step 3 of this
installation procedure.
1.
Plug the AC adapter into a wall outlet or surge protector. Plug the DC
connector into the DC power jack found on the rear of the hub.
2. Plug the flat end (USB A connector) of the provided USB device cable
into the downstream port of your computer or downstream port
of another hub. Then plug the square end (USB B connector) of the
device cable into the upstream port on the rear of the hub.
3. Attach a USB 2.0 or 1.1 device to the hub and begin using it.
Note:
The hub must be connected to a USB 2.0-compliant host in order to
function in Hi-Speed USB 2.0 mode (480Mbps data rate). If the hub is
connected to a USB 1.1-compliant host, it will operate
only in low- and
full-speed mode (1.5Mbps/12Mbps).
F5U255ea.indb 6 11/8/2005 10:06:41 AM