Operating Instructions | 05
Understanding the LEDs | 06
Operating Instructions
Understanding the LEDs
TuneStage 2 Receiver Status
LED Behaviour
Power off
Off
Power switched on
Blinks on/off in 0.5-second intervals for 0 seconds, then turns off
(
Note
: Receiver remains in standby mode, ready to detect a Transmitter.)
Pairing with Transmitter
LED blinks rapidly for 60 seconds (LED will turn OFF after 60 seconds, but
the Receiver will remain detectable)
Paired/receiving signal
On
TuneStage 2 Transmitter Status
LED Behaviour
Power off
Off
Searching for Receiver
Blinks on/off rapidly for up to 60 seconds*
Paired/receiving signal
Blinks once every seconds
*Universal Pairing Sequence:
The Belkin Transmitter will
automatically search for the last
connected/paired Receiver
device first. If no device is
detected, it will then search for
a new Receiver with a security
code of 0000. This sequence will
last up to a total of 60 seconds.
If no connection is made, the
Receiver will return to standby
mode and the Transmitter will
turn off. To retry pairing, press
“PLAY” on the iPod. Pairing will
automatically begin again.
STEP 3: TuneStage 2 Setup for Use with Headphones Enabled with
Bluetooth Technology (Optional)
NOTE:
TuneStage will only pair with stereo headphones enabled with
Bluetooth
technology that have a pairing code of 0000. Consult your headphones’ manual for the
pairing code.
1.
Make sure the TuneStage Receiver’s power button is in the off position.
2.
Put your headphones enabled with
Bluetooth
technology into pairing mode. Consult your
headphones’ user manual on how this is done.
3.
For best results, the Transmitter should be close to the headphones when first making a
wireless connection.
4.
Power on your iPod, and then insert the TuneStage Transmitter into the bottom of the
iPod. Wait approximately two seconds and press “PLAY” on the iPod.
5.
The Transmitter will power on automatically, and the blue LED will begin to blink rapidly
while it searches for your headphones to which to pair.
6.
Your headphones’ LED indicator should also blink during pairing. Consult your headphones’
user manual on how the LED-indicator light works.
7.
The TuneStage Transmitter and your headphones should pair within 60 seconds. You will
be able to hear music through your headphones if your iPod is in play mode.
8.
You can now play any song on your iPod through your headphones. You can control the
volume and track change features through your iPod or through the headphones if they
feature these controls.
