OmniGuard
TM
UPS Power Management Software
11
4.0 Starting OmniGuard
TM
services
The OmniGuard
T M
Software is installed in the host machine/server where the UPS is
connected and the following services have to run in the system for the proper functionality
of the software. Once the services are started, the device will be capable of being
monitored from any remote machine through a web browser.
Step 1:
Select Settings Icon from startup menu that will get you to below screen. Change required
data here as per your pc configuration, such as COM port where the UPS is connected
and Press OK to save the data.
Note:
Any changes in Settings below, must be followed by re-launching the application
again to make changes take effect, otherwise select OK in COM port will not be altered.
