1
___
2
___
3
___
4
___
5
___
6
___
7
EN
5
The Keyboard and/or Mouse is/are not detected or do not work
after installation.
• Make sure the receiver is plugged into the computer's USB port.
• For optimal performance, place the receiver at least eight inches (20cm)
away from the computer monitor, any external storage devices, or other
electrical devices.
• Make sure you have properly installed the batteries.
Test the batteries to make sure they are not dead
(you can do this by installing them into another device).
• You may have other system devices that are conflicting with the Mouse
and/or the Keyboard. Check the IRQ/address setting of these devices for
conflicts and change the settings as required. Please refer to your computer
documentation or the manufacturer’s technical support for assistance in
making these changes.
• Make sure you have properly established communication/synchronization
between the receiver and the Mouse and Keyboard.
• If your Mouse pointer becomes choppy on-screen or the Keyboard does not
register keystrokes, replace batteries swith a fresh set.
• If you do not use the mouse for several minutes it will be put into
a suspended state. To begin using the mouse again move the mouse
or press one of the mouse buttons.
5
Troubleshooting
P74865uk-A_F8E846ukBNDL-DB.indb 5
13/7/05 3:06:34 pm
