background image

8820-00374  RevA01_F7D3301 v1_Share Max Router_add warning 
statement_20100513-ok  

 

Caution: Exposure to Radio Frequency Radiation.  

The device shall be used in such a manner that the potential for human contact 
normal operation is minimized. 
 
This equipment complies with FCC radiation exposure limits set forth for an 
uncontrolled environment. This equipment should be installed and operated with 
a minimum distance of 20cm between the radiator and your body. 
 

Federal Communications Commission Notice  

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential 
installation. 
This equipment generates, uses, and can radiate radio frequency energy, and if 
not installed and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try and correct the 
interference by one or more of the following measures: 
 

  Reorient or relocate the receiving antenna.  

  Increase the distance between the equipment and the receiver.  

  Connect the equipment to an outlet on a circuit different from that to which the 

receiver is connected.  

  Consult the dealer or an experienced radio/TV technician for help. 

 
FCC Caution: Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate this 
equipment. 
 

This device and its antenna(s) must not be co-located or operating in conjunction 
with any other antenna or transmitter. 

 
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection 
of other channels is not possible. 

 

Canada-Industry Canada (IC)

 

The wireless radio of this device complies with RSS 210 Industry 
Canada. This Class B digital apparatus complies with Canadian ICES-003. 

 

Operation is subject to the following two conditions: (1) this device may not cause 
interference, and (2) this device must accept any interference, including 
interference that may cause undesired operation of the device. 

 

Summary of Contents for F7D3301

























Reviews: