73
Enhanced Wireless Modem Router
sections
table of contents
1
2
3
4
5
6
8
9
10
7
ManUally ConfIgURIng nETWoRK sETTIngs
Manually Configuring Network Adapters in Mac OS X v10.x
3�
Next to “Configure”
(2)
, if “Manually” is selected, your Router
will need to be set up for a static IP connection type� Write the
address information in the table below� You will need to enter this
information into the Router�
1�
Click on the “System
Preferences” icon�
2�
Select “Network”
(1)
from the “System Preferences” menu�
(1)
4�
Select the “TCP/IP” tab
(3)
� Next to “Configure:”
(4)
, you should see
“Manually” or “Using DHCP”� If you do not, check the PPPoE tab
(5)
to make sure that “Connect using PPPoE” is
noT
selected� If it
is, you will need to configure your Router for a PPPoE connection
type using your user name and password�
(4)
(5)
(3)
(2)
