manualshive.com logo in svg

Belkin F6D3000-HP, User Manual, Page: 46 / 46

Share
Download
Belkin F6D3000-HP User Manual Download Page 46

If you need warranty or technical support during the warranty support period, you 

can locate the HP support location nearest you on:

 

 

 

http://www.hp.com/support

 

When you contact HP or an authorized HP service provider, please have available 

the product model name and model number, the applicable error messages, and 

type of operating system.

© 2005 Belkin Corporation. All rights reserved. All trade names are registered trademarks of 
respective manufacturers listed. The mark Wi-Fi is a registered mark of the Wi-Fi Alliance. The 
“Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

P74924

Dual-Band Wireless

  

A+G Desktop Card

Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause 
undesired operation of the device.
To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite 
systems) this device is intended to be operated indoors and away from windows to 
provide maximum shielding. Equipment (or its transmit antenna) that is installed 
outdoors is subject to licensing.
Because high power radars are allocated as primary users (meaning they have priority) 
in 5250-5350 MHz, these radars could cause interference and/or damage to license 
exempt LAN devices.
This device has been designed to operate with an antenna having a maximum gain of 2 
dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry 
Canada. The required antenna impedance is 50 ohms.

IC Statement

Summary of Contents for F6D3000-HP















































Reviews:

No comments