F5U303
Belkin Tech Support
US: 800-223-5546, ext. 2263
310-898-1100, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
© 2007 Belkin International, Inc. All rights reserved. All trade names are registered trademarks
of respective manufacturers listed. Windows Vista is either a registered trademark or
trademark of Microsoft Corporation in the United States and/or other countries.
P75559-A
Wireless USB Hub
Start Here
Quick Installation Guide
Wireless USB Hub
This guide will lead you through the basic steps
needed to set up the Belkin Wireless USB Hub.
For further information or greater detail regarding
configuration, please refer to the Belkin User Manual
for this product.
Setup for Windows Vista Users
5
Setup for Windows Vista Users
6
Cable-Association Process
1.
Connect the power supply to the Hub.
2.
Attach the mini-USB cable to the mini-USB port on the side of the Hub
and the other end to your computer’s built-in USB port. This will allow
your computer to recognize the Hub.
3.
The device setup will recognize your Hub as a “Belkin Wireless USB
Hub”. Change the device name if needed, for example, “Living Room”.
You can also change the detection method of the Wireless USB Hub.
Click “Finish”.
4.
Remove the mini-USB cable.
5.
Once this process is complete, return to the Wireless USB Manager.
You should see an icon for the Belkin Wireless USB Hub. If there
are two green arrows pointing to each other, you have successfully
connected to the Belkin Wireless USB Hub.
6.
You can now plug your USB devices into the Hub and access
them wirelessly.
Connect the
power supply
Connect
mini-USB cable
