Setup for Windows Vista Users
5
1.
Insert the Belkin driver-installation CD into your CD-ROM drive. After a few
moments, the setup application should appear on your computer screen.
Note:
If the setup application does not appear, double-click “My
Computer”, and then click your CD-drive icon. This will load the
setup-applications main page.
2.
Click “Install driver” and choose either 32bit or 64bit then follow the
prompts to complete the software-install process.
3.
Double-click the “Wireless USB Control Center” icon found in the
Windows system tray, found at the bottom-right corner of the
Windows desktop.
4.
a. Connect the power supply to the Hub.
b. Attach the mini-USB cable to the mini-USB port on the side of the Hub
and the other end to your computer’s built-in USB port
(Fig. 1)
. This will
allow your computer to recognize the Hub.
5.
Wait approximately one minute for security to become enabled. A
prompt will indicate that the security setup is complete
(Fig. 2)
.
Fig. 2
Setup for Windows Vista
™
Users
(A)
Connect the
power supply
(B)
Connect
mini-USB cable
Fig. 1
