PM00736-A_F5D8235-4_N+_RTR_MNL_jdk.doc
Page 90 of 120
1.
Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”.
2.
You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet”
in the “Connect via:” drop-down menu
(1)
.
[xxxxxxx][use current image]
[keep]
3.
Next to “Configure”
(2)
, if “Manually” is selected, your Router will need to be
set up for a static IP connection type. Write the address information in the
table below. You will need to enter this information into the Router.
[MacOS9 chart.tif] [use current image] [keep]
(1)
(2)
