F5D7631-4_Manual
Page 13 of 61
2.
Select “Network”
(1)
from the “System Preferences” menu.
(1)
3.
Select “Built-in Ethernet”
(2)
next to “Show” in the Network menu.
(2)
(3)
(4)
4.
Select the “TCP/IP” tab
(3)
. Next to “Configure”
(4)
, you should see
“Manually” or “Using DHCP”. If you do not, check the PPPoE tab
(5)
to make
sure that “Connect using PPPoE” is NOT selected. If it is, you will need to
configure your Router for a PPPoE connection type using your user name
and password.
5.
If “Manually” is selected, your Router will need to be set up for a static IP
connection type. Write the address information in the table below. You will
need to enter this information into the Router.
6.
If not already selected, select “Using DHCP” next to “Configure”
(4)
, then click
“Apply Now”.
Your network adapter(s) are now configured for use with the Router.
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web browser’s
settings. If you are having trouble accessing the Internet or the advanced web-
based user interface, then change your browser’s settings to the recommended
settings in this section.
Internet Explorer 4.0 or Higher
1.
Start your web browser. Select “Tools” then “Internet Options”.
2.
In the “Internet Options” screen, there are three selections: “Never dial a
connection”, “Dial whenever a network connection is not present”, and
“Always dial my default connection”. If you can make a selection, select
“Never dial a connection”. If you cannot make a selection, go to the next step.
