49
48
Troubleshooting
49
48
49
48
Enabling WPA-PSK (no server)
1. Under Windows XP, click “Start > Control Panel > Network
Connections”.
2. Right-click on the “Wireless Networks” tab. Ensure the “Use
Windows to configure my wireless network settings” check box
is selected.
3. Under the Wireless Networks tab, click the “Configure” button.
4. For a home or small business user, select “WPA-PSK” under
“Network Administration”.
Note
: Select WPA (with radius server) if you are using this computer to
connect to a corporate network that supports an authentication server
such as a radius server. Please consult your network administrator for
further information.
5.
Select “TKIP” or “AES” under “Date Encryption”. This setting will
have to be identical to the Wireless Router or Access Point that
you set up.
6.
Type in your encryption key in the “Network Key” box.
Important
: Enter your Pre-Shared key. This can be from 8 to 63
characters and can be letters, numbers, or symbols. This same key
must be used on all of the clients that you set up.
7.
Click “OK, to apply settings.