11
10
Configuring the WRE/AP
11
10
11
10
1.
Ensure your WRE/AP and the Wireless Router share the same channel
and security settings. By default, the Wireless Router and WRE/AP
channels are set to channel 11 with no security. If you have never
changed the channel or security settings, you can go to the next step.
If not, please see the “Using the Web-Based User Interface” section in
your User Manual, for instructions.
2.
Find the MAC address on the bottom label of the WRE/AP. There
are two MAC addresses on the bottom label. You will need the MAC
address named “WLAN MAC Address”.
Product Label
For reference, write the MAC address in the following diagram,
“Secondary WRE/AP MAC Address”. Next, you must add the WRE/
AP’s WLAN MAC Address into your Belkin Wireless G Router. See the
next step.