Belkin F5D6231, User Manual

Page: 8 / 83

KNOWING YOUR BELKIN ROUTER
6
5. Connected LED
This unique LED shows you when the Router is connected to the Internet.
When the light is OFF, the Router is NOT connected to the Internet. When
the light is blinking, the Router is attempting to connect to the Internet.
When the light is solid GREEN, the Router is connected to the Internet.
When using the “Disconnect after x minutes” feature, this LED becomes
extremely useful in monitoring the status of your Router’s connection.
OFF Router is not Connected to the Internet
Blinking Green Router is Attempting to Connect to the Internet
Solid Green Router is Connected to the Internet
6. Reset Button
The “Reset” button is used in rare cases when the Router may function
improperly. Resetting the Router will restore the Router’s normal
operation while maintaining the programmed settings. You can also
restore the factory default settings by using the Reset button. Use the
restore option in instances where you may have forgotten your custom
password.
a. Using the Reset Button to Reset the Router
Push and release the Reset button. The lights on the Router will
momentarily flash. The Power/Ready light will begin to blink. When the
Power/Ready light becomes solid again, the reset is complete.
b. Using the Reset Button to Restore the Factory Defaults
Press and hold the Reset button for five seconds then release it. The
lights on the Router will momentarily flash. The Power/Ready light will
begin to blink. When the Power/Ready light becomes solid again, the
restore is complete.
7. Shared Uplink Port
The shared uplink port is provided for connection to a hub or a switch for
expanding the number of network ports on the Router. If you are
connecting a switch or hub to the Router, connect a straight-through
(standard) network cable to this port and to a port on the switch or hub.
Note: The uplink port is shared with port 1 of the Router. You cannot
connect a device to the uplink port and to port 1 at the same time.
P74122_F5D6231-4_man.qxd 11/6/02 1:03 PM Page 6