9
8
Connecting and Configuring your
Phone Adapter
Connecting and Configuring your
Phone Adapter
9
se
ct
io
n
2
1
3
4
5
6
Connecting your Phone Adapter to a Gateway/Router
Installing the Phone Adapter as a client to a router that already
exists.
1.
Identify an available LAN port on your existing router or
home gateway .
2.
Using the Ethernet cable that is included with your Phone
Adapter, take one end of the cable and connect it to the available
LAN port on your Router . Connect the opposite end to the
“Connection to Router” port on the Phone Adapter .
3.
Connect a standard analog phone to the “Phone ” port on the
Phone Adapter .
4.
Locate the power supply that is included with your Phone
Adapter . Plug the power supply’s small connector into the DC
power jack on the Phone Adapter . Plug the power supply into an
empty power outlet .
5.
The Phone Adapter automatically connects to the Internet .The
“connected” LED will blink green to indicate that there is an
Internet connection .
6.
Wait up to five minutes while the Phone Adapter automatically
registers to the iiNetphone Broadband Phone Service .
7.
Once a connection to the iiNetphone Broadband Phone Service is
established, the phone LED will illuminate .
8.
Pick up your handset and ensure you hear a single audible tone .
If you hear a series of beeps then your phone adapter has not
registered on the iiNetphone network .
