Belkin AP21000uk3M, User Manual

Page: 9 / 28

Hookup and Installation
PureAV
Power
Console
Step 2
Remote AC Operation
This function allows you to turn your Power Console on and off via
your preamplifier or receiver equipped with a switched European
power socket.
Note: You cannot turn off the switched sockets on the Power Console
with the “Switched” button on the front of the unit when there
is any external power signal supplied to either the AC or DC
remote inputs.
To install the Remote AC Control Cable:
A. Plug the C8 (Fig. 8 – female) end of the included Remote AC Control
Cable into the “Remote AC IN” socket located on the back of the
Power Console. (Fig. 2a)
B. Press the “Remote” button on the front of the Power Console to turn
on the remote function. The LCD display should read “REMOTE ON”.
(Fig. 2b)
C. Press the “Switched” button on the front of the Power Console to
turn off the switched sockets.
D. Connect the Europlug (male) end of the Remote AC Control Cable
into a switched power socket on a preamplifier or receiver. When you
turn on the receiver or preamplifier, the sockets on the Power
Console that are programmed as “Switched” will be turned on
immediately and the “Switched/Delayed” sockets will come on
after an eight-second delay.
8
Fig. 2a
����
Fig. 2b