21
TROUblesHOOTInG, sUPPORT, anD WaRRanTY
belkin setup cannot connect my Router to the Internet .
If Belkin Setup is not able to connect the Router to
the Internet, please check the following items:
1 .
Use the troubleshooting suggestions within Belkin Setup .
2 .
If your ISP requires a user name and password, make sure that
you have typed in your user name and password correctly . Some
user names require that the ISP’s domain may be at the end of the
name . Example: “myname@myisp .com” . The “@myisp .com” part of
the user name may need to be typed as well as your user name .
3 .
If you continue to have no Internet connection, refer
to “Manually Configuring Network Settings” in this
manual for an alternative setup method .
belkin setup completed installation, but I cannot browse the
Web . The light on the front of my Router is blinking amber .
1 .
Make sure the Router is connected to your modem with an
Ethernet cable via the Router’s one WAN (modem) port .
2 .
Unplug the modem from its power source and make sure
that it goes dark . Then reapply power to the modem .
3 .
Unplug your Router’s power supply, wait 10 seconds,
and plug it back in . This will cause the Router to try
to reestablish communication with the modem .
