BELINEA 1905 G, Manual

Page: 4 / 12

ENGLISH
Belinea 1905 G1 - Operating Instructions -
• First, unplug the power cord from the wall
socket.
• If the LCD screen is extremely dirty, clean it with
a moist cloth. Use only warm water and then wipe
the monitor dry. Solvents or harsh cleaners can
damage the housing. Clean the display surface
only with a soft cloth, otherwise you may damage
the display’s coating.
CARING FOR yOUR LCD MONITOR
• If the monitor is only slightly dirty, clean it using
a soft, dry and antistatic cloth.
• The LCD monitor’s screen surface is very sen-
sitive. Please avoid any contact with the surface
(finger, pencil etc.) and be especially cautious
during transportation since jolts and shocks can
cause the screen to become scratched (always
use the original packaging).
WALL MOUNTING
The Belinea monitor is shipped with the standard desktop configuration. However, you can optionally mount the
device on a wall or on a monitor swivel arm (optional accessory). Please follow the corresponding instructions
(4-hole assembly with a spacing of 4 × 4 inches (100 × 100 mm) according to the international VESA FDMI stan -
dard).
IMPORTANT INFORMATION
Note on monitor placement
• The setup location must not be extremely hot,
cold, humid or dusty. Heat and cold can impair
the functionality of the monitor. Humidity and dust
can cause the monitor to fail.
• Do not place the monitor near heaters such as
radiators or the like. Do not expose the monitor
to mechanical vibrations or jarring.
• Position the monitor so that no direct light or sun
strikes the screen, which could cause reflections
that reduce the quality of the image.
Notes on power connection
Only use the power cord designated for use in
your country.
The wall outlet should be within easy reach.
Pulling the power plug is the only way to discon-
nect the monitor from the power source.
• This monitor is ENERGy STAR
®
-compatible.
MAxDATA is an ENERGy STAR
®
partner and
guarantees that this device complies with the
ENERGy STAR
®
guidelines for optimizing power
consumption.
Safety instructions for operation
The power cord must not be damaged. Do not
place any objects on the power cord and make
sure it does not have any knots. To unplug the
cord, always pull on the plug and not on the cable
itself. Damage to the power cord may result in fire
or cause electric shocks.
• Avoid covering the ventilation slots. Air circulation
is necessary to prevent the monitor from over-
heating. If the air circulation is restricted it could
cause fire or damage the monitor.
• Do not use any solvents to clean the monitor, as
the housing could be damaged. For more infor-
mation about cleaning the monitor, please see
“Caring for your LCD Monitor”.
Never open the monitor housing yourself. There
is a danger of electric shock and other hazards.
The monitor may only be opened and serviced
by qualified professionals.
Note on resolution
All resolutions provided by the graphics card that
deviate form the physical resolution of the panel
are adjusted by interpolation. This can impair the
image quality.
Notes on ergonomics
In order to relieve your eyes, neck and shoulder
muscles when looking at the screen, we recom-
mend that you maintain a distance of 50 to 75 cm
between the monitor and your eyes. In addition,
you can relax your eyes by regularly focusing on
an object at a distance of about 6 m. To achieve
an ergonomic sitting position, your elbows, pelvis,
knees and ankles should form a right angle.