background image

ENGLISH

 

  

 Belinea 10 19 01 - Operating Instructions - 

7

TROUBLESHOOTING

Blank Screen

Power indicator is off

Make sure the power cable is connected properly (see section “Connecting”).

Make sure that the monitor was turned on using the power switch (see section “Startup”).

Power indicator lights orange 

Perhaps a power saving mode is active? Press any key on your keyboard or move the mouse.

Power indicator lights green

A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard 
or move the mouse.

“No Signal” message

Is the signal cable connected to the monitor and the PC’s graphics port (see section “Connecting”)?

Is the PC turned on (see your PC’s documentation)?

Display Problems

Image is displaced to the left/right or to the top/bottom

If the image appears normal but off-center, you can adjust it using the OSD functions. For further information, see 
chapter “Basic Setup”, section “Automatic Image Adjustment” or chapter “OSD Menu Functions”, section “Image 
Adjust”. 

Image flickers or is shaky

-  Perhaps setup fi le chosen for the monitor is incorrect. For information on monitor setup under Windows 95/98/

ME/2000/NT/XP consult the “Confi guration” section.

Image is blurred

Check brightness and contrast settings (see chapter “OSD Menu Functions”, section “Contrast/Brightness").

Check the image noise and sharpness setting (see “Fine Tune” and “Sharpness” functions in the “OSD Menu Func-
tions” section).

Color problems

-  If the colors are off (e.g. white is not really displayed as white etc), you should adjust the color temperature (see 

“Color Adjust” function in section “OSD Menu Functions”).

LCD panel

 

19 inch diagonal size (48,3 cm visible), low radiation according to TCO 

'

99, certifi ed 

to ISO 13406-2, pixel fault class II, TN panel technology 

Contrast ratio 

 500:1 

(typical)

Viewing angle

 

(contrast ratio ≥ 10:1) horizontal 140°, vertical 130° (typical)                
(contrast ratio ≥ 5:1) horizontal 160°, vertical 150° (typical)

Response time

 

12 ms (typical)

Brightness

 250 

cd/m

2

 

(typical)

Input signal

 

Video: analog, 15 pin mini D-SUB 

Display colors

 

16.2 mill. colors 

Synchronization

 

30–80 kHz horizontal, 50–75 Hz vertical

Video band width

 

135 MHz (pixel rate)

Ergonomic resolution 

1280 × 1024 (60 Hz)

Audio 

Amplifi er: 1 Watt at 8 Ohms 

 

Loudspeaker: 1 Watt continuous load, 2 Watts peak power

Power connection

 

100–240 V AC, 50–60 Hz

Power consumption

 

ON status: max. 55 W with Audio; color of the status LED: green

 

SLEEP status: max. 2 W; color of the status LED: orange

 

Power saving functions EPA certifi ed 

Dimensions / weight

 

Width: 414.5 mm, height: 433.5 mm, depth: 200.5 mm; 5.6 kg (net)

Operating environment

 

Operation: 0 to +40 °C, humidity: 20–80 % (without condensation)

 

Storage: -20 to +60 °C, humidity: 8–95 % (without condensation)

TECHNICAL SPECIFICATIONS

Summary of Contents for 101901













Reviews: