BELINEA 101830, Service Manual

Page: 57 / 85

CA110 Application (Continued)
56
Go to cover page
After installation of Chroma 2250, CA110 and LCD monitor.
- Turn on LCD monitor.
- Turn on Chroma 2250 as shown in Fig. 7.
- Provide CROSS-Hatch pattern at timing H=60.023KHz/1024 pixels
V=75.029Hz/768 lines
by Chroma 2250 (as shown in Fig.3 & Fig. 8.).
- Put on the cover (black) of Probe CA-A30 as shown in Fig.9.
- Set "Measurement/viewing selector" to for zero calibration
of CA-110.
- Turn on CA-110 as shown in Fig. 10.
- Press "0-CAL" button as shown in Fig. 11.
LCD monitor & Chroma 2250 :
LCD Colour Analyzer CA-110 :
Step A: Access Factory Mode
Fig. 7
Chroma MODEL 2250 Chroma MODEL 2250
Measurement/viewing selector Measurement/viewing selector
cover (black) cover (black)
Fig.8
Fig. 9
Fig. 10
(TURN ON)
(Press
0-CAL)
Fig. 11
Access Factory Mode
Factory Mode:
How to Get into Factory Mode Menu
Turn off LCD monitor.
Push AUTO " " & " " & " " buttons simultaneously
,then release Power buttun only, untill picture comes on the screen.
Press MENU " " button, bring up Factory mode indication as
shown in Fig 2.
Use button to select factory adjustment indication (for example:
MAXDATA 180P V1.88 02-04-07), which is the entrance of the factory
adjustment menu, press MENU " " button to access it. The
window shows as below.
AUTO
MENU
Fig. 1
1 = Buttons for the OSD menu (On-Screen-Display)
2 = Power indicator
3 = Power button
2 3
1
AUTO MENU INPUT
MENU
Fig. 2
Factory Mode indication==>
MAXDATA 180P V1.88 02-04-17
Max 101830