Belinea 10 20 30W - Operating Instructions -
5
ENGLISH
UNPACKING
Carefully lift the monitor out of the packaging and make
sure that all components are included (see
fi
g. 1).
Save the original box and packing material in case you
have to ship or transport the monitor.
To set up the device, you must
fi
t the monitor base
together.
¶
To connect the monitor to your PC ........................
1.
Make sure that the PC and monitor are unplugged.
2.
Connect the 15-pin signal cable to the monitor and
the PC (see
fi
g. 2).
CONNECTING
¶
Connecting the audio cable ...................................
If your computer is equipped with an audio output port,
then connect one end of the sound cable to the audio
input connector of the monitor (
d
in
fi
g. 3) and the other
end to the Line-Out connector of the computer.
Figure 1.
LCD Monitor
Figure 3.
Connecting the monitor to the power source
Figure 2.
Connecting the monitor to the PC
¶
To connect the monitor to the power source ........
Connect the separate power cable (
c
in
fi
g. 3) to the
monitor and a grounded outlet.
¶
USB Ports ..................................................................
The monitor features
fi
ve USB ports: one upstream and
four downstream ports (see
fi
gure 2).
Signal cable
USB
Downstream
port
AC IN D-SUB LINE IN
USB
upstream
port
AC IN D-SUB LINE IN
2
1
1.
First start your PC and then turn on your Belinea
monitor using the power switch (
e
in
fi
g. 4). The
power indicator (
f
in
fi
g. 4) should light up blue.
2.
Adjust the image to meet your requirements (see the
following sections “Basic Setup” and “Image settings
using the OSD menu”).
3.
If there is no image displayed on the monitor, consult
the section “Troubleshooting”.
STARTUP
Power cord
Audio cable
VGA cable
USB cable
