Home position
The first time the supply voltage is switched on, i.e. at the time of commissioning, the
actuator carries out a synchronisation. The synchronisation is in the home position
(0%).
The actuator then moves into the position defined by the positioning signal.
Y = 0%
cw
Y = 0%
ccw
1
0
Adaption and synchronisation
An adaption can be triggered manually by pressing the “Adaption” button or with the
PC-Tool. Both mechanical end stops are detected during the adaption (entire setting
range).
Automatic synchronisation after pressing the gearbox disengagement button is
configured. The synchronisation is in the home position (0%).
The actuator then moves into the position defined by the positioning signal.
A range of settings can be adapted using the PC-Tool (see MFT-P documentation)
Accessories
Description
Type
Electrical accessories
Auxiliary switch, add-on, 1 x SPDT
S1A
Auxiliary switch, add-on, 2 x SPDT
S2A
Feedback potentiometer 140 Ohm, add-on
P140A
Feedback potentiometer 140 Ohm, add-on, grey
P140A GR
Feedback potentiometer 200 Ohm, add-on
P200A
Feedback potentiometer 500 Ohm, add-on
P500A
Feedback potentiometer 500 Ohm, add-on, grey
P500A GR
Feedback potentiometer 1 kOhm, add-on
P1000A
Feedback potentiometer 1 kOhm, add-on, grey
P1000A GR
Feedback potentiometer 2.8 kOhm, add-on
P2800A
Feedback potentiometer 2.8 kOhm, add-on, grey
P2800A GR
Feedback potentiometer 5 kOhm, add-on
P5000A
Feedback potentiometer 5 kOhm, add-on, grey
P5000A GR
Feedback potentiometer 10 kOhm, add-on
P10000A
Feedback potentiometer 10 kOhm, add-on, grey
P10000A GR
Connecting cable 5 m, A+B: RJ12 6/6, To ZTH EU
ZK1-GEN
Connection cable 5 m, A: RJ11 6/4, B: Free wire end, To ZTH EU
ZK2-GEN
Description
Type
Mechanical accessories
Actuator arm, for one-sided spindle clamp K-ENSA
AH-25
Shaft extension 240 mm, for damper spindles Ø 8...25 mm or Ø
10...25 mm
AV8-25
Angled ball joint with M8, suitable for damper crank arm KH8
KG8
Straight ball joint with M8, suitable for damper crank arm KH8
KG10A
Damper crank arm, for damper spindles
KH8
Spindle clamp, one side for NM..A
K-ENMA
Spindle clamp, one side for NM..A, SM..A
K-ENSA
Spindle clamp, reversible for NM..A and LMQ..
K-NA
Form fit insert 8x8 mm, for NM..A
ZF8-NMA
Form fit insert 10x10 mm, for NM..A / SM..A
ZF10-NSA
Form fit insert 12x12 mm, for NM..A / SM..A
ZF12-NSA
Form fit insert 15x15 mm, for NM..A / SM..A
ZF15-NSA
Form fit insert 16x16 mm, for NM..A / SM..A
ZF16-NSA
Mounting kit for linkage operation, NM..A for flat installation
ZG-NMA
Anti-rotation mechanism 180 mm
Z-ARS180
Base plate extension from NM..A to NM..
Z-NMA
Position indication for LM..A, NM..A, SM..A, GM..A
Z-PI
NM24A-MOD
Damper actuator, modulating
communicative
hybrid mode, AC/DC 24 V, 10 Nm,
Product features
www.belimo.com
NM24A-MOD • en-gb • 2018-04-26 • subject to changes
3