Distance at top must be
the same as at bottom
Actuator should be
parallel to the plane of
the damper frame and
sleeve.
Actuator must be
perpendicular to the
damper shaft.
Allow any non-concentric shaft
motion to be taken up by
mounting stud in middle of U-slot
Figure 1
Figure 2
Figure 3
Anti - rotation strap
11695 LF- P
The heavier duty 11414 AF- P
may be ordered when needed
.
Bend strap at perforations to
adjust for necessary height
.
Note how the pin of the anti-rotation strap is
mounted in middle of actuator U-slot.
Gear Train Motors and Linkages - Replacements with Belimo March 2018
21
