BELIMED CS 720, Service Manual, Page: 33 / 62

(c) Check the bottom pan for debris and, if necessary, clean.
(d) Remove any pan or instrument that may have fallen in the pan or tracks
8.2 Weekly Maintenance
8.2.1
!
!
!
Utility Room
WARNING: PRESS EMERGENCY STOP BEFORE PROCEEDING.
(a) Remove the supply tank lids to gain access to the filter box. Check whether filter box
in the supply tank is dirty and, if necessary, clean. You should only find paper and maybe
some very small plastic particles. If any metal particles are found, contact maintenance
immediately.
8.2.2 Chamber
WARNING: PRESS EMERGENCY STOP BEFORE PROCEEDING.
(a) Check whether all nozzles in the wash chamber spray manifold (Lower Ring are the
wash nozzles and Upper Ring are the rinse nozzles) spray correctly. Clean clogged
nozzles. When cleaning the nozzles, the recommended method is to remove them one by
one and clear them up. If that is not possible, a small screwdriver or another pointed object
might do the job. Be careful that the mouthpiece of the nozzle is not damaged or scratched.
8.3 Monthly Maintenance
8.3.1 Utility Room
WARNING: PRESS EMERGENCY STOP BEFORE PROCEEDING.
(a) Clean the water regulator strainer if applicable. You must shut off the water supply
before proceeding.
(b) Drain supply Tank; check probes and temperature sensors inside the supply tank for
build up. Clean if necessary. Follow proper refill procedure.
CS 720 Service Manual Revision 1.1 Page 25