1. Use supplied hardware pack to tighten the headboard bracket as shown, please note
that the screws should not too tight at this step, in case to have the right position to
lock on the bed legs;
2. Use the headboard screws to tighten two pieces of headboard brackets to the specific
hole on the headboard;
3. Loosen the screws on headboard bracket as shown
4. Pull the adjustable bed close to the headboard, use the wireless remote long press
Head Up button rise to the max angle;
5. Adjust the headboard bracket to lock on the bed legs, then tighten the screws;
6. The same step to tighten the headboard bracket to another adjustable bed
Bed Legs Connector Installation
Head
Foot
