BELGACOM Twist 505, User Manual, Page: 4 / 64

Base stations
2
Twist 505
Base station
Event indicator (red)
Blinking : New events
(new SMS, missed calls etc...)
Fast blinking : SMS Memory
full
Answer machine indicator (red)
ON :Answer machine activated
OFF :Answer machine
deactivated
Blinking : New messages
Fast blinking :Answer machine
memory full
Using GAP standard compliance
The GAP standard guarantees that all DECT
TM
GAP handsets and base stations comply with a minimum
operating standard irrespective of their make.Your Twist 505/515 handset and base station are GAP
compliant, which means the minimum guaranteed functions are : register a handset, take the line, receive a
call and dial.The advanced features may not be available if you use another handset than a Twist 505/515
with your base station.
To register and use your Twist 505/515 handset with a GAP standard base station of a different make,
first follow the procedure described in the manufacturer’s instructions, then follow the procedure page
12 to register a handset.
To register a handset from another make to the Twist 505/515 base station, place the base station into
registration mode, then follow the procedure in the manufacturer’s instructions.
Register a DECT
TM
peripheral without keypad
Some DECT
TM
peripherals, such as repeaters, do not have a keypad.A special menu-operated procedure is
used to register such peripherals with the base station without the need to disconnect the base station.
See page 28 to register the peripheral. Use the peripheral instructions to register it to the base station.
Paging key
Press to locate all handsets
Paging key
Press to locate all handsets
Loudspeaker
Delete key
Press to delete current message
Long press to delete all the
messages (except unread ones)
Twist 515
Base station
Power indicator (green)
ON : System well connected to
the mains
OFF : System not powered
Blinking : the line is busy
ON/OFF key
Press to play or stop the
messages
Long press to switch answer
machine ON/OFF
Power indicator (green)
ON : System well connected to
the mains
OFF : System not powered
Blinking : the line is busy
Onis 300 _UK_Belgacom.qxd 15/04/03 12:22 Page 2