21
B
ASE
SETTINGS
Re-initialise the base
When you re-initialise your base, all the base
parameters are reset to their initial values
(factory settings).
On the navigator key
, press or until
the
BASE SET
screen is displayed,
press
OK
to confirm.
Select
REINIT BASE
using or .
Press
OK
.
Enter the base code. Press
OK
.
To exit the menu, press the red key
.
Note carefully the new base code on
the back cover, you will need it to
modify some parameters.
When you re-initialise the base, the
base code becomes 0000 again.
LU 251907375A_Twist 375_GB.book Page 21 Mardi, 26. juillet 2005 12:08 12
