20
B
ASE
SETTINGS
Modifying the pause duration
If you connect your telephone to a private
automatic branch exchange, you may need
to modify the pause duration in order to use
your telephone correctly. Four
preprogrammed durations are proposed on
the list, the correspondence between the
number of the list and the duration is the
following.
On the navigator key
, press or until
the
BASE SET
screen is displayed, press
OK
to confirm.
Select
PAUSE DURA
using or .
Press
OK
.
An information screen presents the current
pause duration.
•
To keep the same time, press
C
.
•
To modify the time, select the new pause
time using or . Press
OK
.
number
corresponding
duration
1
1 second
2
1,5 second
3
2 seconds
4
3 seconds
To exit the menu, press the red key
.
Modifying the base code
The base code (
0000
by default setting) is
required to access the following functions:
•
modifying the base code,
•
re-initialise the base,
•
registering a new handset,
•
de-registering a handset.
On the navigator key
, press or until
the
BASE SET
screen is displayed,
press
OK
to confirm.
Select
CHANGE CODE
using or .
Press
OK
.
Enter the old base code using the keypad
(default is 0000). Press
OK
.
Enter the new base code using the keypad. It
must be composed of 4 digits miminum up to
8 digits maximum. Press
OK
.
Confirm by entering the new base code
again. Press
OK
.
To exit the menu, press the red key
.
To enter the pause mode during
dialling, press the key until letter
P appears.
Modify the base code only if you
really wish to protect the access to
these functions.
LU 251907375A_Twist 375_GB.book Page 20 Mardi, 26. juillet 2005 12:08 12
