background image

Do not use this appliance in the immediate surroundings of a bath, a 

shower or swimming pool. 

Do not leave the appliance unattended whilst connected to the mains 

power supply or when in use. 

Do not remove from the mains power supply by pulling the cord; switch 

off and remove the plug by hand. 

Do not use this appliance for extended periods of time. 

Do not use the appliance for anything other than its intended use. 

Do not cover this appliance. 

Do not block the air intake of the appliance; place in an open, well-

ventilated space. 

Do not use this appliance outdoors. 

Do not attempt to move the appliance whilst it is in use. 

Do not touch the appliance during use, as it will get very hot and could 

cause injury. 

Do not use the appliance with a programmer, timer, separate remote-

control system or any other device that will switch the appliance 

on automatically, as there is a risk of fire if the heater is covered or 

positioned incorrectly. 

Do not clean the appliance with abrasive chemicals or materials such as 

scourers as they may damage the appliance and impair future function. 

The appliance should be used on a stable, heat resistant surface.  

The appliance must not be located immediately below or next to a 

mains power supply. 

Always unplug the appliance after use and before any cleaning  

or maintenance. 

Always ensure that the appliance has cooled fully after use, any cleaning 

or maintenance.  

Never use accessories that are not recommended or supplied by the 

manufacturer. It could cause danger to the user and damage to  

the appliance. 

Use of an extension cord with the appliance is not recommended. 

This appliance is intended for domestic use only. It should not be used 

for commercial purposes 

Warning: 

In order to avoid overheating, do not cover the appliance. 

Warning: 

This appliance is not equipped with a device to control the 

EH0933 PTC Tower Heater

4

Summary of Contents for EH0933











Reviews: