background image

THE 

SCIENCE

 

BEHIND HEAT

Please read all of the instructions carefully and retain for future reference. 

Safety Instructions

When using electrical appliances, basic safety precautions should always 

be followed. 

Check that the voltage indicated on the rating plate corresponds with 

that of the local network before connecting the appliance to the mains 

power supply.  

Children younger than 3 years old should be kept away from the 

appliance unless continuously supervised. 

Children aged from 3 years and less than 8 years shall only switch on/off 

the appliance, provided that it has been placed or installed in its intended 

operating position and they have been given supervision or instruction 

concerning the use of the appliance in a safe way and understand the 

hazards involved. 

Children aged from 3 years and less than 8 years shall not plug in, 

regulate or clean the appliance or perform user maintenance. 

Children should be supervised to ensure that they do not play with  

the appliance. 

This appliance is not a toy. 

This appliance contains no user serviceable parts. If the power supply 

cord, plug or any part of the appliance is malfunctioning or if it has been 

dropped or damaged, only a qualified electrician should carry out repairs. 

Improper repairs may place the user at risk of harm. 

Keep the appliance and its power supply cord out of reach of children.  

Keep the appliance and its power supply cord away from heat or sharp 

edges that could cause damage. 

Keep the power supply cord away from any parts of the appliance that 

may become hot during use. 

Keep the appliance away from other heat emitting appliances. 

Keep furniture, curtains and other flammable material at least 120 cm 

away from the appliance. 

Do not run the supply cord under carpets, rugs etc. or anywhere where 

it may present a trip hazard. 

Do not immerse the appliance or plug in water or any other liquid. 

Do not operate the appliance with wet hands. 

EH0933 PTC Tower Heater

3

Summary of Contents for EH0933











Reviews: