Page 11
TLX320 Matrix Switch Product Manual
thinklogical
Rev. I, May 2021
Section 2: Set-Up & Installation
Contents
When you receive your Thinklogical
®
TLX320 KVM Matrix Switch, you should find the following
items in the quantities specified in your order:
•
TLX320 Chassis
(includes 2 Power Modules, 1 Fan Tray, up to 20 Input/Output Cards and one or
two Controller Cards)
•
Power Cord
– Qty. 1 per power supply – PWR-000056-R (International connections may differ)
•
Product Manual CD
•
Product Quick Start Guide
•
Chassis
Options (Spares)
:
•
Back-up Controller Card
•
Spare Fan Tray
•
Spare Power Module
•
Data Input/Output Cards, 16 Ports
•
Micro-HDMI In / EDID Out I/O Cards
The TLX320 KVM Matrix Switch ships configured to customer specifications.
Unpacking the TLX320
The TLX320 is designed t
o be mounted in a standard EIA 19” rack.
All physical connections to the
product use industry-standard connectors. Non-supplied cables that may be needed are commercially
available. All connections are found on the rear of the unit.
1
Carefully remove the TLX320 Matrix Switch from its shipping container. Inspect the unit to make
certain that no damage occurred during shipment.
2
All the I/O cards are installed at the factory to meet your specific configuration. Ensure that the I/O
cards are properly seated in the unit and that all the SFP modules are sealed with a removable dust
plug. All the I/O cards are held in place by thumb screw retainers.
Note: Ensure that all thumb screws are finger tight so that all the modules are properly
held in the chassis.
3
Verify that the power supplies are fully seated in the chassis and that the retaining screws are
secure.
4
Verify that the fan tray is fully seated in the chassis and that the thumb screws are secure.
5
When the TLX320 has been inspected and found to be in suitable condition, the installation process
can begin.
