Page 3
TLX12 Matrix Switch Product Manual
thinklogical
Rev. E, Oct., 2019
DESIGN FEATURES
Each
TLX12
includes the following features:
•
12 fiber or 12 CATx ports - In and Out, non-blocking matrix switching
•
Each connection supports 10Gbps / 6.25 Gbps with re-clocking input
•
Single-mode, multi-mode fiber and BNC coaxial capability
•
Comprehensive system setup and control via Thinklogical
’s Configurator software (included)
•
Multicasting and macros supported
•
SNMP control protocol
•
Controllable via LAN or serial connection
Desktop or Rack Mount
You may choose to place your
TLX12 Chassis
on or under a shelf or desktop (rubber feet included,
under-desk mounting brackets, Kit ENCA000797, available), or rack mount it using the supplied EIA 19
”
mounting brackets. In any mounting configuration, the front panel should be visible and unobstructed so
that the navigation buttons and LCD display are accessible. All connections are made on the rear of the
chassis. The TLX12 chassis does not need to be opened or accessed. The sturdy metal case allows
units to be stacked as needed
(maximum of four units per stack, with a minimum of two inches of
clearance between stacks for adequate ventilation)
.
Front Panel Display and Navigation Buttons
The LCD and Navigation Buttons are used to view and modify System and Network settings, assign IP
addresses, monitor the temperature and fans, and to reboot or power down the unit. The TLX12 front-
panel LCD should be visible and accessible for system setup.
TLX12 FRONT PANEL
LCD & Navigation Buttons
Button Panel
Summary of Contents for ThinkLogical TLX12
Page 1: ...Rev E Oct 2019 ...
