background image

 

 

PDU 4/4 Product Manual, Rev. A     November  2020 

 

Page 17 

 

Australia & New Zealand  

This is a Class A product. In a domestic environment this product may cause radio interference, in which case 
the user may be required to take corrective action. 

European Union, Declaration of Conformity 

Manufacturer’s Name & Address:   

Thinklogical, 

BELDEN

 BRAND

 

100 Washington Street 
Milford, Connecticut 06460 USA 

Thinklogica

l’s  products  comply  with  the  requirements  of  the  Low  Voltage  Directive  2006/95/EC,  the  EMC 

Directive  2004/108/EC,  the  RoHS  Directive  2011/65/EU,  the  WEEE  Directive 

2012/19/EU 

and  carry  the 

 

marking accordingly. 

Standards with Which Our Products Comply 

Safety 

 

IEC 62368-1:2014Ed.2+C1 

 

CB Scheme Certificate 

Electromagnetic Emissions 

CENELEC EN 55022:2010 +AC:2011 

Electromagnetic Immunity 

EN 55024:2011+A1 
CENELEC EN 55032:2015 
EN 61000-3-2:2000 Harmonics 
EN 61000-3-3:2008 Flicker 
EN 61000-4-2:2009 Electro-Static Discharge Test 
EN 61000-4-3:2006 A1:2008, A2:2010 Radiated Immunity Field Test 
EN 61000-4-4:2004 Electrical Fast Transient Test 
EN 61000-4-5:2006 Power Supply Surge Test 
EN 61000-4-6:2009 Conducted Immunity Test 
EN 61000-4-11:2004 Voltage Dips & Interrupts Test 

Supplementary Information

 

The  following  statements  may  be  appropriate  for  certain  geographical  regions  and  might  not  apply  to  your 
location: 

  This  Class  A  digital  apparatus  meets  all  requirements  of  the  Canadian  Interference-Causing  Equipment 

Regulations. 

Cet appareil numérique de la classe A respecte toutes les exigencies du 

 

Règlement sur le matérial brouilleur du Canada

  This is a Class A product. In a domestic environment, this product may cause radio interference, in which 

case the user may be required to take corrective action. 

  This equipment has been tested and found compliant with the limits for a Class A digital device, pursuant to 

part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful 
interference when the equipment is operated in a commercial environment. This equipment generates, uses 
and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instruction 
manual, may cause harmful interference to radio communications in which case the user may be required 
to make adequate corrective measures at their own expense. 

  This Class A digital apparatus complies with Canadian ICES-003 and has been verified as compliant within 

the Class A limits of the FCC Radio Frequency Device Rules (FCC Title 47, Part 15, Subpart B CLASS A), 
measured to CISPR 22:1993 limits and methods of measurement of Radio Disturbance Characteristics of 
Information Technology Equipment. 

  Users may notice degraded audio performance in the presence of electro-magnetic fields. 

 

 

Summary of Contents for thinklogical PDU-000001






















Reviews: