47
Densité 3+ FR1
User Manual
Info tab
When the REF-1801 is included in an iControl environment, certain information about the
card should be available to the iControl system. The user can enter labels and comments
that will make this card easy to identify in a complex setup. This information is entered into
data boxes in the
Info
panel.
Fig. 4-12: Info tab
Label:
Type the label used for this card when it appears in iControl applications
Short Label
:
Type the short-form label that iControl uses in some cases (8 characters)
Source ID
:
Type a descriptive name for this card
Comments
:
Type any desired text
The remaining data boxes show manufacturing information about this card.
Three buttons in the panel give access to other information.
•
Details
…: Reports the Firmware version, service version, and panel version for this card
•
Advanced
...: Shows the LongID for this card. The LongID is the address of this REF-1801-
FR1 in the iControl network.
