Protocol settings for IO-Link master
Information sheet LioN-P multiprotocol
Release 1.2 04/2017
5.2 Factory reset
13
5.2
Factory reset
A factory reset restores the original factory settings and thus resets the
changes and settings you have made up to that point. It also resets the
protocol selection. To perform a factory reset, set the first rotary encoding
switch (x100) to 9, the second (x10) to 7, and the third (x1) also to 9.
Afterwards perform a power cycle and wait 10 seconds due to internal
memory write processes.
Follow the steps from section
“EtherNet/IP – PROFINET” on page 11
to select a new protocol.
x100
x10
x1
Factory Reset
9
7
9
